Transformers>>FL-150W-24V-LED-DIM1

FL-150W-24V-LED-DIM1

  • Transformer
    The actual transformer is encapsulated in the enclosure.
    Input leads are 20 AWG output leads are 16 AWG.
    Lead insulation is 105°C.
    The transformer uses a class B 130°C insulation system.
  • Enclosure
    Enclosure temperature does not exceed 70°C @ 40°C ambient.
    Wiring compartment has 2 knockouts sized For 3/4 inch screw cable connectors.
    The removable cover for the wiring compartment is secured in place by screw.
    The enclosure is black powder coated.
  • General
    The transformer has a manual reset thermal circuit breaker on the secondary side.
    The transformer can be controlled with a low-voltage dimmer.
    The transformer is ETL listed.

  • Specifications
    Max Load: 150W
    Input Voltage: 120V 60Hz
    Output Voltage Full Load: 22V DC
    Input Current Full Load: 1.95 A
    Open Circuit Output Voltage: 24.4V DC
    Output Current Full Load: 6.25A
    Efficiency: 85.0%
    Coil Former: Double section Bobbin
    Circuit Brakers: Primary and secondary auto reset
    Thermal Class: B 130C
    Leads Primary: PVC 600V 18#
    Leads Secondary: PVC 300V 12#
    Dimensions: Length (LxWxH): 8" x 4 1/8" x 3 1/4"